|
|
 |
|
Powermax ® systems |
|
 |
|
|
|
|
|
|
|
| |
|
Powermax30 |
Powermax45 |
Powermax1000 |
Powermax1250 |
Powermax1650 |
| Handheld cut capacity |
Recommended |
1/4" (6 mm) |
1/2" (12 mm) |
3/4" (19 mm |
7/8" (22 mm) |
1-1/4" (32 mm) |
| Maximum |
3/8" (10 mm) |
3/4" (19 mm) |
1" (25 mm) |
1-1/8" (29 mm) |
1-1/2" (38 mm) |
| Severance |
1/2" (12 mm) |
1" (25 mm) |
1-1/4" (32 mm) |
1-1/2" (38 mm) |
1-3/4" (44 mm) |
| Mechanized pierce capacity |
Maximum |
Not applicable |
3/8" (10 mm) |
1/2" (12 mm) |
5/8" (16 mm) |
3/4" (19 mm) |
| Gouge capacity |
Metal removed per hour
depth x width |
Not applicable |
6.2 lbs (2.8 kg) |
11 lbs (4.9 kg) |
15 lbs (6.8 kg) |
24 lbs (10.8 kg) |
| Output current (amps) |
|
15 - 30 |
20 - 45 |
20 - 60 |
25 - 80 |
30 - 100 |
| Dimensions |
depth x width x height |
14.0 x 6.6 x 12.0" |
16.8 x 13.7 x 6.8" |
23.1 x 10.7 x 19.6" |
23.1 x 10.7 x 19.6" |
26.4 x 16.8 x 25.8" |
| |
(356 x 168 x 305 mm) |
426 x 348 x 172 mm) |
(586 x 271 x 498 mm) |
(586 x 271 x 498 mm) |
(671 x 427 x 655 mm) |
|
|
| |
Mechanized systems |
 |
|
|
|
|
|
|
|
|
| |
|
|
MAX200 |
HySpeed HSD130 |
HPR130XD |
HPR260XD |
HPR400XD |
| Capacity |
Mild steel |
Dross free |
25 mm (1") |
16 mm (5/8") |
16 mm (5/8") |
32 mm (1-1/4") |
38 mm (1-1/2") |
| Production (pierce) |
25 mm (1") |
25 mm (1") |
32 mm (1-1/4") |
38 mm (1-1/2") |
38 mm (1-1/2") |
| Severance (edge starts) |
50 mm (2") |
38 mm (1-1/2") |
38 mm (1-1/2") |
64 mm (2-1/2") |
80 mm (3.2") |
| Stainless steel |
Production (pierce) |
25 mm (1") |
20 mm (3/4") |
20 mm (3/4") |
32 mm (1-1/4") |
45 mm (1-3/4") |
| Severance (edge starts) |
50 mm (2") |
25 mm (1") |
25 mm (1") |
50 mm (2") |
80 mm (3.2") |
| Aluminum |
Production (pierce) |
25 mm (1") |
20 mm (3/4") |
20 mm (3/4") |
25 mm (1") |
45 mm (1-3/4") |
| Severance (edge starts) |
50 mm (2") |
25 mm (1") |
25 mm (1") |
50 mm (2") |
45 mm (1-3/4") |
|
* Note: Take care in comparison: competitors
often show maximum cutting speeds rather
than speeds that deliver the best cuts, as
shown above. Cut speeds listed above deliver
best cut quality for a given process, but cut
speeds can be up to 50% faster.
** ISO 9013 is a standard that defines cut quality
of thermally cut parts. The lower the range
(range 1 is the lowest), the smaller the angle
on the cut face. Cut angle in range 4 is better
than in range 5. |
|
| |
Computer numerical controls (CNC) hardware |
 |
|
|
|
|
|
|
|
| |
|
Powermax30 |
Powermax45 |
Powermax1000 |
Powermax1250 |
Powermax1650 |
| Drive amplifiers supported |
Analog |
SERCOS |
Analog |
SERCOS |
Analog, 250 W (internal) |
SERCOS |
| Maximum axes |
6 |
12 |
4 |
12 |
4 |
12 |
| Maximum inputs and outputs |
48/48 |
512/512 |
12/12 |
512/512 |
12/12 |
512/512 |
|
|
